Tronex Stubby Flat Nose - Smooth Jaw Pliers

These stubby flat nosed plier was designed specically for jump rings and chainmaille.These short/stubby jaws keep your hands closer to your work which in turn gives you better control. The jaws are designed to be parallel while holding a 16-18 gauge jump rings. Tip length is .

Tronex Stubby Oblique Nose - Smooth Jaw Pliers

These oblique nosed plier was designed specically for jump rings and chainmaille.These short/stubby jaws keep your hands closer to your work which in turn gives you better control. The jaws are designed to be parallel while holding a 16-18 gauge jump rings. Tip length is .

Tronex Chain Nose - Smooth Jaw Pliers

Chain nose pliers are a must have tool used in many areas of jewelry making. They are used for grasping, holding and bending wire. Tronex models have slightly rounded inner edges to minimize marring. The long jaws allow for exceptional access into narrow areas. Tip length is 1.30” (33mm).

Tronex Chain Nose - Short Smooth Jaw Pliers

Chain nose pliers are a staple for jewelry artists. These pliers feature a short, strong nose with induction hardened tips for additional strength. These pliers feel good in your hand and have excellent gripping capabilities. The short smooth jaw allows for firm gripping and amazing control. Great for many jewelry applications including chainmaille (you will need two!) and wire work.

Tronex Needle Nose - Smooth Jaw Pliers

The Tronex needle nose pliers are the same as the Tronex chain nose pliers, except that the jaws are machined in thin half cones. This thin profile increases tool access. The cone shape can be used for precision loop forming of leads or wire. Tronex needle nose pliers feature very fine tips. Each of the two tips is .030” x .030”. The four inner edges of the jaw are eased to protect leads or wire during forming. Tronex needle nose pliers have flat-faced inner jaws.

Tronex Needle Nose Serrated Tip Pliers

These needle nose pliers feature serrated tips for extra gripping ability. The tips measure .05" (10.9mm) across and a height of .04" (1 mm). These pliers feature: slightly rounded inner edges, a bearing ring lap joint for superior performance, ESD safe cushion grips, polished and hand crafted finish.

Tronex Needle Nose - Short Smooth Jaw Pliers

The Tronex short needle nose pliers are the same as the Tronex short chain nose pliers except that the jaws are machined in thin half cones. This thin profile increases tool access. The cone shape can be used for precision loop forming of leads or wire. Tronex needle nose pliers feature very fine tips. Each of the two tips is .030” x .030” Also the four inner edges of the jaw are eased to protect leads or wire during forming. Tronex needle nose pliers have flat-faced inner jaws.

Tronex Round Nose - Short Jaw Pliers

Chain nose pliers are a must have tool that are used in many areas of jewelry making. They are used for grasping, holding and bending wire. Tronex models have slightly rounded inner edges to minimize marring. The long jaws allow for exceptional access into narrow areas. Tip length is 1.30” (33mm).

Tronex Round Nose Pliers

The Tronex round nose pliers have a jaw formed by two long, perfectly machined cones. Round nose pliers are generally used both to clamp and to form loops on leads or wire. The Tronex round nose pliers feature very fine tips. Each of the two tips is .030” in diameter. The very long jaw of the Tronex round nose pliers, 1.3”, allows for an increased range of loop diameters, from .030” to .250” to be formed. The long jaw also can provide increased access.

Tronex  Half Chain Nose, Half Round Nose Pliers

Featuring half round and half chain nose jaws, these pliers are used for bending, making loops, gripping and wrapping. Features include: bearing ring lap joint design for superior performance; ESD safe cushion grips with stainless steel leaf springs; ergonomic handles; polished, hand crafted finish; slightly rounded inner edges, Made in the USA.

Tronex Half Flat, Half Round Nose Pliers

These specialized pliers are a great addition to any wire work or bench jeweler's tool kit. They make soft bends and curves in wire and are also often used for ring shaping. One half is a flat nose and the other half is half rounded into a half moon shape.

Tronex Flat Nose - Step Tip Pliers

Flat nose pliers are used for gripping and bending wire. These pliers are designed with a step at the tip in order to achieve additional clamping force. The 542/742 series of this tool has a wider tip for more control. Tip length is 1.25” (31.7mm) Tip Width .15".

Tronex Flat Nose - Wide Tip Smooth Jaw Pliers

Flat nose pliers are used for gripping and bending wire. These pliers are designed with a step at the tip in order to achieve additional clamping force. Tip length is 1.25” (31.7mm) .25" wide Tip.

Tronex Flat Nose - Smooth Jaw Pliers

These flat nose pliers were developed specifically for our jewelry customers. The blades run flat the full length of the tool for grasping and bending along the entire blade. Because the tips are thinner, use caution when working with heavier gauge wire. Tip length is 1.25” (31.7mm).

Tronex Flat Nose - Short Smooth Jaw Pliers

These flat nose pliers feel good in your hand and have excellent gripping capabilities. The short smooth jaw allows for firm gripping and amazing control. Great for many jewelry applications including chainmaille (you will need two!) and wire work. This model features standard handles with super comfortable cushion grips.

Tronex Flat Nose - Short, Wide Smooth Jaw Pliers

These flat nose pliers were developed specifically for our jewelry customers. The blades run flat the full length of the tool for grasping and bending along the entire blade. Because the tips are thinner, use caution when working with heavier gauge wire.

Tronex Flat Nose - Short Tapered Smooth Jaw Pliers

These pliers feature short narrow tapered tips. This allows the user to get into tight spaces yet maintain strong control and leverage.

Tronex Bent Nose - Fine Tips Pliers

Bent nose pliers are perfect for heavier gauge wirework. The very fine tips allow for access into very confined areas. The bend in the tips is great for gripping and holding. This part of the tool can handle heavier gauges than the tips. Tip diameter is .07” (1.8mm).

Tronex Bent Nose - Sturdy Tip Pliers

These bent nose pliers offer the same popular shape as our 551/751 bent nose pliers but with a heftier, sturdier tip. This tip allows for usage with heavier gauge wire but still allows for exceptional access into confined spaces.

Tronex Bent Nose - Serrated Tip Pliers

Bent nose pliers are perfect for heavier gauge wirework. The very fine tips allow for access into very confined areas. The bend in the tips is great for gripping and holding. This part of the tool can handle heavier gauges than the tips. Tip diameter is .07” (1.8mm).

Tronex Bent Nose - Extra Fine 40 deg. Tip Pliers

These pliers feature very fine tips for delicate work with small pieces. It fits into very tight spots and has a unique 40 degree bend. Tips measure .05"

Tronex Bent Round Nose Pliers

Used for holding and gripping in jewelry and wirework, these American-made pliers have exceedingly exceptional quality.

Tronex Long Bent Nose - Extra Fine Pliers

Bent nose pliers are perfect for heavier gauge wirework. The very fine tips allow for access into very confined areas. The bend in the tips is great for gripping and holding. These were made specifically for the jewelry industry and are extra-long with bent tips. The flat interior surfaces are ideal for opening and closing jump rings, flat-crimping and creating angled bends.