Tronex Cutters

Tronex cutters are known worldwide to be the best cutters available. Excellent craftsmanship, performance and comfort are things you can count on. You won’t find tools for better quality and value than Tronex.


Features Include

  • Most tools made in the USA
  • Bearing ring lap joint design provides superior performance to other cutters made with rivet joints or box joints
  • Comfortable cushion grips with stainless steel leaf springs
  • Made of high grade carbon steel
  • Each cutter individually checked and tested

 

Tronex Cutters are some of the best that money can buy. No matter how much you pay for a cutter, you can still damage it by trying to cut items it wasn’t designed to cut.  Protect your investment and be aware of what the limitations are of your cutter. Cutting capacity is rated for the throat of the cutter, not the tip. The tip most always has a lower rating than the throat. A good rule of thumb is to never cut wire less than 20 AWG with the tip of your cutter and/or 4 gauge smaller than the throat's rating (whichever is finer).  

Cut Types:

Flush - Cut result leaves a narrow and short peak along the “pinch” line, decreasing the surface area at the cut. This is the most popular cut of the two types and can normally cut heavier gauge material than Razor Flush®.

 

Razor Flush® - The finest cut result available with the smoothest finished-end result. This is the second most popular of the two.

Tronex Miniature High Relief Tip, Razor Flush® Cutters
This tip cutter has deep relief for an exceptionally low profile. The short sturdy jaw features Razor Flush cutting edges. When you need to get into that very tight place to make a cut, this is the tool for you. Maximum cutting capacity is 22 AWG copper wire.

Model No Handle Size Cut Type MSRP
5049 Standard Razor Flush® $84.16
7049 Long Razor Flush® $86.23

Tronex Angulated 50 Degree Head, Flush Edge Cutters

Cutting edges on normal oval taper head cutters cut at 16 degrees. These cutters cut at 50 degrees and have a small cutting head with flush edges. Angulated cutters are ideal for wirework projects when reaching into very tight spots is required. These handy cutters are durable yet offer fine cutting capability. Head width is .22” (5.6mm) at the widest point. Maximum cutting capacity is 22 AWG copper wire.

Model No Handle Size Cut Type MSRP
5082 Standard Flush $85.41
7082 Long Flush $86.23

Tronex Taper Head, Relieved Cutters

This is a favorite cutter for beaders. The flush edges are perfect for all diameters of braided beading wire such as Soft Flex® flexible beading wire. A combination of comfort, functionality and precision make this Tronex cutter a best seller. “Relieved head” means a low profile for greater access. Head width is .37” (9.5mm) at the widest point.

Model No Handle Size Cut Type Cutting Capacity MSRP
5222 Standard Flush 16 AWG $55.96
7222 Long Flush 16 AWG $58.51
5223 Standard Razor Flush® 18 AWG $60.41
7223 Long Razor Flush® 18 AWG $62.96

Tronex Oval Head, Semi-Relief Cutters

Oval head cutters are perfect for a variety of projects. With more material in the head than taper cutters, they are stronger and can handle heavier duty wire. This cutter handles beading wire with ease and can be used for many types of jewelry projects. The cut is flush and clean and will maintain its cutting edge for a very long time. If you are doing a lot of wire work, see Tronex's Razor Flush® version of these versatile cutters. Head width is .37” (9.5mm) at the widest point.

 

Model No Handle Size Cut Type Cutting Capacity MSRP
5112 Standard Flush 16 AWG $53.43
7112 Long Flush 16 AWG $55.96
5113 Standard Razor Flush® 18 AWG $57.87
7113 Long Razor Flush® 18 AWG $60.41

Tronex Large Oval Head, Semi-Relief, Razor Flush® Edge Cutters

This cutter has a large oval head for strength and razor flush edges for precise cuts leaving almost no burr. This is a multi purpose tool, for making exceptionally flush cuts on thicker wire. Head width is .41” (10.5mm) at the widest point.

Model No Handle Size Cut Type Cutting Capacity MSRP
5513 Standard Razor Flush® 14 AWG $59.14
7513 Long Razor Flush® 14 AWG $62.96

Tronex Extra Large Oval Head Cutters

This is a popular cutter because it can handle heavier gauge wire. It is available in flush or Razor Flush® cutting edges. These are a must have addition for any wire work artist using heavier gauge wire. Head width is .61” (15.5mm) at the widest point. Maximum cutting capacity is 12 AWG copper wire.

Model No Handle Size Cut Type Cutting Capacity MSRP
5612 Medium Flush 12 AWG $65.08
5613 Medium Razor Flush® 12 AWG $74.92

Tronex Heavy Duty, Flush Edge Cutters

This cutter, forged of carbon steel, has strength in the head and joint areas needed to cut heavier gauge wire or cable. Cushion grips provide operator comfort. A jaw restraining device is attached to insure spring retention. Wire harness and jewelry making are popular applications for these heavy duty cutters.

Model No Handle Size Cut Type Cutting Capacity MSRP
5812 Standard Razor Flush® 12 AWG $61.00
7812 Long Razor Flush® 12 AWG $63.60
Model No Handle Style Head Shape Cut Type Max Cut
AWG
MSRP
5049 Standard Micro Tip Razor Flush 22 $84.16
7049 Long Micro Tip Razor Flush 22 $86.23
5082 Standard Micro Tip Flush 22 $85.41
7082 Long Micro Tip Flush 22 $86.23
5112 Standard Oval Flush 16 $53.43
7112 Long Oval Flush 16 $55.96
5113 Standard Oval Razor Flush 18 $57.87
7113 Long Oval Razor Flush 18 $60.41
5222 Standard Tapered & Relieved Flush 16 $55.96
7222 Long Tapered & Relieved Flush 16 $58.51
5223 Standard Tapered & Relieved Razor Flush 18 $60.41
7223 Long Tapered & Relieved Razor Flush 18 $62.96
5513 Standard Oval Razor Flush 14 $59.14
7513 Long Oval Razor Flush 14 $62.96
5612 Standard Oval Flush 12 $65.08
5613 Standard Oval Razor Flush 12 $74.92
5812 Standard Oval Flush 12 $61.00
7812 Long Oval Flush 12 $63.60
Print | Sitemap
© Micro-Tools 2016